7 Tips for Troubleshooting an Oven Not Working Correctly
When your oven’s not working, what can you do?
Ovens are among the essential appliances in any kitchen. They enable us to cook food so it’s at its most delicious while also acting as a centerpiece around which many meal preparations revolve.
For these reasons, it can be distressing when your oven is not working. If you have an oven problem, there are several possible causes and many things you can do to try and fix the issue.
Read on for our in-depth guide to resolving the most common oven problems.
Table of Contents
1. Check the Power Source
Checking the power source is essential when troubleshooting an oven not working. Make sure that you plug the appliance into a functioning outlet.
Check the power cord and the circuit breaker that controls it. If the circuit breaker trips, reset it and check the outlet voltage with a voltage tester.
Also, ensure that you are using the right power source, or the oven could operate at the wrong voltage. If you connected the range to a surge protector, bypass it to restore the power.
If you connect the appliance to a wall switch, ensure it is set to the on position. If any of these elements are not functioning, you should call a professional to repair them.
2. Inspect the Heating Elements
Make sure the heating elements aren’t blocked and are getting to the right temperature. If the heating element isn’t clean, you should clean it and make sure the wires aren’t broken.
Make sure that you unplug the oven from the power source before you clean and check the heating elements. Also, check for loose parts or connections and look at the temperature sensor that tells the oven’s control board what temperature the oven is at.
If you see a broken or damaged part from the faulty oven, it is best to replace it so that the oven can work well. Once you have checked the oven, turn it on and let the elements heat up to the setting you want. A clean, well-checked oven is safe to use and works well.
3. Test the Temperature Sensor
You can locate the temperature sensor near the back of the oven cavity and measures the temperature inside the oven. To test the temperature sensor, use an oven thermometer to measure the temperature inside the oven and compare it to the temperature on the front panel.
If the two readings differ, the temperature sensor may need replacing. To replace the temperature sensor, disconnect the power from the oven, unscrew the insulation cover, remove the faulty sensor, replace it with a new sensor, and secure the insulation cover again.
After replacing the sensor, re-test the oven to ensure it functions.
4. Check the Oven Door
Checking the broken oven door is one of the most important things to do when an oven isn’t working right. Check the latch, hinges, and seals on the oven door to make sure everything is in place and working as it should.
Look for things like kitchen rags or utensils that might be in the way of the door. Make sure the door is straight, and the hinges are in the right place.
If they are out of place, you may need to fix or replace them. Once it’s said that the oven door works, use it again. If it still doesn’t work, a broken thermostat or the heating element is the possible reason.
5. Inspect the Thermostat
When trying to figure out why an oven isn’t working, it’s important to check the thermostat. First, take the back panel off the oven and find the thermostat.
Take out the oven’s thermostat. You always have to wear gloves and safety glasses. Check the thermostat for rust or burn marks, which could mean that you have a broken stove.
If the wires look frayed or loose, you should replace them. It is important to make sure the thermostat works right. Follow the directions on how to turn off and on the thermostat.
If the oven doesn’t start to heat up, it could be a broken thermostat. To get the stove to work again, You have to change the bad or defective thermostat.
6. Clean the Oven
Cleanliness is essential when troubleshooting an oven that isn’t working. Before taking any other steps, start by cleaning the or with a commercial oven cleaner—especially if food debris and grease have accumulated in the component.
Additionally, make sure to clean the oven racks. A thorough cleaning can produce all the difference in its performance. Be sure to wear gloves when manipulating any oven component to avoid any accidental burns.
Remember to check for excessive debris where the controls are, as dust buildup can hinder its functionality. Take your time, and clean any component that looks dirty.
7. Consult a Professional
If your oven is not working, consultation with a professional oven repair man can be a significant first step. Do some research online and find a qualified repair company in your area.
Make sure that you are ready with the basic information about your oven when you call for a consultation. Have your exact model number and serial number, as well as any notes you have on recent attempts to troubleshoot the oven.
Be prepared to provide detailed information about what’s not working. Take a video or picture of your oven to show the technician.
Communication helps diagnose the problem as soon as possible. Additionally, research the warranty on your oven to determine coverage for repairs.
Do This to Your Oven Not Working Correctly
Troubleshooting an oven not working can be a frustrating task. Yet, you can resolve the most common oven issues with the right tips. If you have followed the given information and still can’t figure out the problem, consider having a professional technician take a look.
We hope that you’ve enjoyed reading this post. Check out our other blog posts if you’d like to read more great content.
